How to setup QGIS and GPS signal - RTK quality?

Hello,
I have F9P module. wchich I bought with heading option.

In generaln I'd like to use it for AgOpenGPS.

But at the begioning I'd like to set up my fields borders.
I have QGIS 3.10, where I can download maps of my fields from the Government.

Then how to set up.
I was following Youtube channel how to follow it.
It's not working for me at all.

Now I do not see the satelites on the list.

Then I can not have gps data here

And here is my setup of the F9P

Could You help me to connect it for QGIS and then for AoG?
thanks and regards,

Jacek

ps. sorry my German is so poor that I'd like to speak English or Polish

I have already VSPE and put in as a spitter from com6 to com10, and both uses com10

any my point is movin on the qgis. I have an antenna on the balcony - just now I'm in the city, and I'm in the 6floor builidng

Ntrip client step by step

VSPE

and AgOpenGPS - without external Ntrip client, but setup builit in one.

Is it ok now?

Does qgis show exact position to set up field boundaries?

Wade is that ok, that in the top of the NTRIP client I have: Bad GGA Data?
Why?

how we can debug it?
Is it possible that the problem is with location of the antenna? It's on the balcony. 2nd floor in the 6 floor building.

I had tried to send Your config file, and I get error.

Maybe here is some issue?

On version 6.1 your config I can send it to device, but BAD GGA error still occurs

On others there were no communication.

Aby recomendation for cable?

tried other cable.
tried to resend config file for f9p.

baudaret 9600 and sent with success.

But ntrip client shows all the time - bad GGA data.

AoG showed RTK fix for short time. Then only float fix.

Also changed the usb port on my laptop so now I have com5

What could be wrong?

tablet and other cable same issue.
Today I had been in the countryside - still issues with rtk fix

other cable

whats wrong?

still bad gga